• Presonus R65 Studio Monitors in India
  • Presonus R65 Studio Monitors in India
  • Presonus R65 Studio Monitors in India

Presonus R65 Studio Monitors - Pair

SKU: R65PRESONUS
MRP:
₹96,200.00
₹86,580.00
10% Off
(Inclusive of all taxes)
On Special Orders only. Please Call/Whatsapp for Best Price and Availability.
More Information
- +

Description

PreSonus R65 active studio monitors are fitted with a custom 6.8" Air Motion Transformer ribbon tweeter that delivers superb transient response and ultra-low distortion. The R65's custom-coated 6.5" woven Kevlar LF driver provides more dynamic output than conventional woofer designs, thanks in part to the rigid cone's superior ability to maintain a more constant dispersion pattern across its frequency response range. Amplified by 100-watt RMS of Class D amplification driving the woofer and 50-watt RMS driving the tweeter, the PreSonus R65 gives you exceptionally transparent sound with reduced reflections.

Superior clarity and transient response
To achieve high-frequency resonance-peak damping, many manufacturers inject conventional dome tweeters with fluid that raises mass, and in the process, sacrifice transient response time. The custom AMT tweeter in the PreSonus R65 uses an ultra-thin, folded Kapton membrane with an inlaid aluminum circuit that functions as the voice coil; this lets the tweeter move concurrently with the electric current. The result is most impressive clarity and superior transient reproduction that will make marathon sessions less fatiguing and give you better mixes.

Excellent dispersion and stereo imaging
As compared with traditional 1" dome tweeters, which provide a small projection area, an unfolded AMT tweeter diaphragm delivers between eight and 13 times the projection area - considerably larger coverage. This means you'll enjoy a much wider stereo soundstage with the PreSonus R65 than traditional designs can provide. The R65 exhibits wide lateral dispersion and very limited vertical dispersion. Narrow vertical dispersion reduces reflections from your ceiling and work surface that can cause smearing due to phase incoherence. The R65's broad, even horizontal, dispersion gives you a wide sweet spot. And being less sensitive to room-aberration interference, R65s perform more predictably and sound more consistent from room to room.

 Presonus R65 Studio Monitors Features:

Components and construction:

  • 2-way active AMT design provides articulate high-frequency response and wide stereo imaging
  • Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies
  • 6.5 Kevlar LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass
  • Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment

User controls:
  • Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement

​Power and safety:
  • Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
  • RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection
  • Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W
  • External mains fuse
  • Internal power supply with IEC connector

Presonus R65 Studio Monitors Specifications:

Inputs:
  • 1- Balanced XLR
  • 1- Balanced ¼” TRS
  • 1- Unbalanced RCA

Performance:
  • Frequency Response: 45 Hz – 22 kHz
  • Crossover Frequency: 2.7 kHz
  • LF Amplifier Power: 100W Class D
  • HF Amplifier Power: 50W Class D
  • Peak SPL (@ 1 meter): 104 dB
  • LF Driver: 6.5” Kevlar®
  • HF Driver Type: AMT
  • Diaphragm: 6.8-inch2 (4,400 mm2)
  • Equiv. Diaphragm ø: 3” (75 mm)
  • Input Impedance: 20 kΩ balanced, 10 kΩ unbalanced
  • SNR (typical, A-weighted): >100 dB

Power:
  • Factory preprogrammed: 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
  • Standby Power: < 0.5W

Protection:
  • RF interference
  • Output-current limiting
  • Over-temperature
  • Turn-on/off transient
  • Subsonic filter
  • External mains fuse

User Controls:
  • Volume Range: A-type taper
  • HF Driver: Linear, +1 dB, -3 dB, -6 dB
  • Highpass filter: Linear, 60 Hz, 80 Hz, 100 Hz
  • Acoustic Space: Linear, -1.5 dB, -3 dB, -6 dB
  • Energy Conservation Mode: On/Off/Query

Cabinet:
  • Vinyl-laminated, medium-density fiberboard

Physical:
  • Width: 8” (203 mm)
  • Depth: 10.3” (261 mm)
  • Height: 13” (328 mm)
  • Weight: 14.7 lbs (6.65 kg)

Customer Reviews

Login

Don't have an account?
Sign Up
×

Your Shopping Bag


Your shopping cart is empty.